| QM INDUSTRIES QAAMH18A090SEN Mounted Units & Inserts | w:90 mm; h1:230 mm; d4 ≈:105 mm; dk:105 mm; d2 max.:182 mm; Mass rod end:15 kg; l5 ≈:45 mm; α:5 °; d:80 mm; Basic static load rating C0:655 kN; |
| QM INDUSTRIES QMFY08J035SEC Mounted Units & Inserts | Basic dynamic load rating C:3800 kN; Basic static load rating C0:6400 kN; ra max.:4 mm; Da max.:602 mm; D:620 mm; Misalignment factor k1:0.12; B:150 mm; s1 max.:32.6 mm; Reference speed:800 r/min; da min.:438 mm; |
| QM INDUSTRIES DVF11K200SM Flange Block Bearings | B2 B Dynamic (Cr):mm; Limiting speed for lubrication with:0 min-1; Static (Cor):90 mm; Weight:0 min-1; d:111.6 mm; Pu:564 kN; Oil:84.530 kN; B1:76 mm; D1:mm; Grease:803 kN; |
| QM INDUSTRIES QMFX08J035SN Mounted Units & Inserts | Basic dynamic load rating C:19.8 kN; Mass needle roller and cage assembly:0.021 kg; Reference speed:12000 r/min; Fw:35 mm; Basic static load rating C0:39 kN; U:17 mm; Fatigue load limit Pu:4.65 kN; Ew:40 mm; Limiting speed:13000 r/min; |
| QM INDUSTRIES QVVPN16V070SO Mounted Units & Inserts | d1:690 mm; B5:110 mm; Mass lock nut:98.9 kg; B:85 mm; G:Tr 600x6; h:25 mm; Associated spanner:TMFN 600-750; d2:648 mm; Associated eyebolt for handling:M 12; b:45 mm; |
| QM INDUSTRIES QAMH15A075SB Mounted Units & Inserts | Fw:20 mm; Basic dynamic load rating C:13.8 kN; Fatigue load limit Pu:2.16 kN; Mass needle roller and cage assembly:0.012 kg; Reference speed:19000 r/min; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 20x26x4; Ew:26 mm; Designation associated G design radial shaft seal with a low cross-sectional height:G 20x26x4; U:13 mm; Limiting speed:22000 r/min; |
| QM INDUSTRIES QAMH18A308SN Mounted Units & Inserts | Fatigue load limit Pu:0.335 kN; T:38.8 mm; d:23.812 mm; Recommended tightening torque for grub screw:4 N·m; Recommended diameter for attachment bolts, inch G:0.375 in; N:12.3 mm; A:31 mm; Basic dynamic load rating C:14 kN; Limiting speed:7000 r/min; L:95 mm; |
| QM INDUSTRIES QMMH18J304SO Mounted Units & Inserts | Stabilizing ring:SR-16-13; P60°:138 kN; Bearing limiting speed:6000 r/min; H2:31.75 mm; h:31.75 mm; S:4.763 mm; A1:88.9 mm; PG:1/8 NPT; Da:140 mm; Cap bolt recommended tightening torque:298.3 N·m; |
| QM INDUSTRIES QVPN24V110SEC Mounted Units & Inserts | B:29 mm; Dynamic (Ca):108 kN; Pu:12.200 kN; d2 (max):78.4 mm; s:1.5 mm; r1s (min):2 mm; rs (min):2 mm; d2:55 mm; b:9 mm; E:104.5 mm; |
| QM INDUSTRIES QAATU26A500SM Mounted Units & Inserts | Sealed Speed Rating n3:2100 rpm; Fillet Radius ra:2.50 mm; d:100.000 mm; Grease Speed Rating Open/Shielded n1:3000 rpm; B:82.55 mm; Oil Speed Rating Open/Shielded n2:3600 rpm; Basic Static Radial Load Rating Co:150000 N; Basic Dynamic Radial Load Rating C:182000 N; Accessories:Metal Shields; D:215.0000 mm; |