| QM INDUSTRIES QVPN19V303SM Mounted Units & Inserts | r3,4 min.:2.1 mm; D1 ≈:110 mm; da min.:72 mm; Reference speed:5000 r/min; F:77 mm; d:60 mm; s max.:2.1 mm; rb max.:2 mm; da max.:74 mm; Basic static load rating C0:160 kN; |
| QM INDUSTRIES QMTU26J415SM Mounted Units & Inserts | D1:130 mm; a:2.5 mm; B:50 mm; Tolerance shaft:e7; Specific dynamic load factor K:25 N/mm²; Mass bushing:1.65 kg; Permissible sliding velocity v min.:0 m/s; h:101.5 mm; d:100 mm; Permissible sliding velocity v max.:0.5 m/s; |
| QM INDUSTRIES QVPN28V415SM Mounted Units & Inserts | Grease:337 kN; Dynamic (Cr):3 mm; Static (Cor):5.5 mm; with cylindrical bore:3 000 min-1; d:85 mm; rs (min):2 mm; B:36 mm; D:150 mm; Oil:38.910 kN; Pu:260 kN; |
| QM INDUSTRIES QMTU22J407SEN Mounted Units & Inserts | G:M 30x2; l7 min.:34 mm; l1 min.:65 mm; dk:40.7 mm; d:30 mm; Basic dynamic load rating C:62 kN; B:22 mm; d2 max.:75 mm; Material constant KM:330; r1 min.:0.6 mm; |
| QM INDUSTRIES QMMH15J215SET Mounted Units & Inserts | Hydraulic nut:HMV 10 E; G:M 50x1.5; B1:42 mm; B:14 mm; Mass adapter sleeve assembly:0.29 kg; Lock nut:KMFE 10; d3:70 mm; d:50 mm; d1:44.45 mm; |
| QM INDUSTRIES QVPN19V304SN Mounted Units & Inserts | Grease Speed Rating n1:3200 rpm; Basic Dynamic Radial Load Rating C:154000 N; Basic Static Radial Load Rating Co:163000 N; Sealed Speed Rating n3:3200 rpm; Fillet Radius ra:2.00 mm; Accessories:One Seal & Snap-Ring; d:65.000 mm; Oil Speed Rating n2:4300 rpm; D:140.0000 mm; B:58.70 mm; |
| QM INDUSTRIES QMF08J035SO Mounted Units & Inserts | Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3600 rpm; Sealed Speed Rating n3:2600 rpm; d:85.000 mm; Basic Dynamic Radial Load Rating C:142000 N; B:49.20 mm; Accessories:No Shield, no Seal,; D:150.0000 mm; Basic Static Radial Load Rating Co:176000 N; Grease Speed Rating n1:2600 rpm; |
| QM INDUSTRIES QMFX08J035SEO Mounted Units & Inserts | Roller and cage thrust assembly:K 89314 TN; Basic dynamic load rating C:186 kN; Housing washer:GS 89314; Eb:123 mm; Basic static load rating C0:800 kN; Fatigue load limit Pu:81.5 kN; D:125 mm; Shaft washer:WS 89314; Limiting speed:2600 r/min; Dw:10 mm; |
| QM INDUSTRIES QMTU26J415SEN Mounted Units & Inserts | Oil Speed Rating n2:2400 rpm; Basic Dynamic Radial Load Rating C:302000 N; Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:390000 N; B:52.00 mm; Fillet Radius rb:1.00 mm; d:180.000 mm; Grease Speed Rating n1:1900 rpm; D:320.0000 mm; |
| QM INDUSTRIES QMTU26J500SEN Mounted Units & Inserts | Ca:55.804 mm; Cap bolt recommended tightening torque:298.3 N·m; P180°:57.4 kN; PosiTrac Plus contact element:2 x B10724-113; Pa:16.7 kN; Labyrinth ring:2 x LOR 111; P90°:84.5 kN; PG:1/4 NPT; A2:155.575 mm; J min.:295.275 mm; |