| AMI UCFA208NP Mounted Units & Inserts | ra max.:0,6 mm; Basic static load rating (C0):4,8 kN; Outer Diameter (mm):40; Da max.:36 mm; B:12 mm; Weight:0,065 Kg; (Grease) Lubrication Speed:15 000 r/min; da min.:21 mm; Brand:KOYO; D:40 mm; |
| AMI UEFL209 Flange Block Bearings | Bearing number:H414245/H414210; B:41.275 mm; (Oil) Lubrication Speed:3600 r/min; r4 min.:3.3 mm; Size (mm):68.262x136.525x41.27; r3 min.:3.3 mm; (Grease) Lubrication Speed:2600 r/min; Bore Diameter (mm):68.262; d:68.262 mm; r1 min.:3.5 mm; |
| AMI UEHPL207-23MZ20CB Hanger Unit Bearings | Size (mm):80x140x26; Brand:CX; B:26 mm; C:26 mm; Outer Diameter (mm):140; Width (mm):26; (Grease) Lubrication Speed:4500 r/min; Basic dynamic load rating (C):70,2 kN; Weight:1,4 Kg; d:80 mm; |
| AMI UEFL205-15NP Mounted Units & Inserts | Outer Diameter (mm):152; d:30 mm; Bearing number:TGB35279; Size (mm):30x152x86; D:152 mm; C:86 mm; Width (mm):86; Brand:SNR; Bore Diameter (mm):30; |
| AMI KHME205 Mounted Units & Inserts | Stud Length (B1):3.500; Static Load Rating (Cor):55,000; Material - Stud and Roller head: Hardened carbon steel alloy, Needle rollers:52100 Chrome steel o; Tire Outer Dia. (Dt):4.000; Stud Dia. (ds):1.500; Total Length (B):5.780; Threads (G) - 1-1/2-12UNF:11/212UNF; Thread Length (G1):1.5; Dynamic Load Rating (Cr):21,400; Tire Washer Width (C1):0.031; |
| AMI UENST209 Mounted Units & Inserts | Bearing number:UCP213; S2:29 mm; W:150 mm; s1:25 mm; g:27 mm; Brand:CRAFT; Bore Diameter (mm):65; b:70 mm; a:265 mm; d:65 mm; |
| AMI UKFS308+H2308 Mounted Units & Inserts | Size (mm):17x40x12; ra max:0,6 mm; da min:21 mm; s:1,2 mm / Axial displ; D1:32,5 mm; d:17 mm; da max:21,5 mm; r1 min:0,3 mm; - HJ203-E / Designation, L-section ring:HJ203E / Designation; Cr:20800 N / Dynamic lo; |
| AMI UCFB204C4HR23 Flange Block Bearings | Maximum Capacity / Filling Slot:No; Snap Ring:No; da min:371 mm; Enclosure:Open; Manufacturer Name:NTN; Basic dynamic load rating (C):187 kN; Bore:14.173 Inch | 360 Mi; Weight / LBS:37.479; db min:371 mm; Mass:12.3 kg; |
| AMI UKPX12+HA2312 Pillow Block Bearings | Seal Type:Molded Shroud; Bearing Type:Ball Bearing; O.D. Type:Spherical OD; Dynamic Load Rating:10800 lbf; Series:Standard; Bore Type:Cylindrical bore; Material:Bearing Steel; Shaft Size d:2 1/16 in; Sub Series:RA..RRB; Center of Bearing from End S:11.99 mm; |
| AMI UEHPL207CW Hanger Unit Bearings | Outer Diameter (mm):790; C:308 mm; Width (mm):308; Size (mm):480x790x308; Brand:ISO; B:308 mm; D:790 mm; Bore Diameter (mm):480; d:480 mm; Bearing number:24196 K30W33; |