| AMI UCNST210-31 Take Up Unit Bearings | C:16 mm; Bore Diameter (mm):22; Radial Clearance:0.005 to 0.020 mm; Bore Size:22 mm; Groove Width:1.4 mm; a (max):2.5 mm; B:16 mm; r1 min.:0.5 mm; Cy (max):3.3 mm; D:56 mm; |
| AMI UENST209 Mounted Units & Inserts | Bearing number:UCP213; S2:29 mm; W:150 mm; s1:25 mm; g:27 mm; Brand:CRAFT; Bore Diameter (mm):65; b:70 mm; a:265 mm; d:65 mm; |
| AMI UEFCS208-24NPMZ20RF Mounted Units & Inserts | Min operating temperature, Tmin:-20 °C; Basic static load rating (C0):33 kN; (Oil) Lubrication Speed:4 300 r/min; C:39 mm; Ce min:5 mm; D:170 mm; Outer Diameter (mm):170; ra max.:2 mm; da min.:91 mm; Y2:4.5; |
| AMI UCTBL206-18CEW Mounted Units & Inserts | Bearing Weight:194.500 Kg; Y0 - ISO Factor4:2; e - ISO Factor3:0.34; Y1 - ISO Factor5:2.98; Superseded Part:23260YMBW507C08C3; B - Outer Ring Width:192.000 mm; Cage Material:Brass; B - Inner Ring Width:192 mm; r - Outer Ring To Clear Radius2:4.000 mm; Cg - Geometry Factor8:0.1297; |
| AMI UCNFL201-8MZ2W Flange Block Bearings | G2 - Heat Generation Factor (Rib-Roller End):243.6; Cage Type:Stamped Steel; Design Units:Imperial; Cone Part Number:LM446349; Series:LM446300; db - Cone Backface Backing Diameter:9.92 in; B - Cone Width:1.8125 in; C1 - Dynamic Radial Rating (1 million revolutions)6:99200 lbf; a - Effective Center Location4:0.26 in; d:9.25 in; |
| AMI UKFL307+H2307 Mounted Units & Inserts | r1 min.:0,2 mm; h1:84 mm; Bearing number:PHS 22; dk:38,100 / mm; dL:37 mm; Thread (G):M22×1,5; Basic dynamic load rating (C):37,4 kN; d1:25,8 mm; Weight:0,49 Kg; C1:20 mm; |
| AMI UEFC207-23TCMZ20 Mounted Units & Inserts | Weight:0,037 Kg; x:2.29 mm; Width (mm):15.880; Bearing number:M20101; Outer Diameter (mm):38.100; Fw:31.750 mm; C:15.880 mm; Basic dynamic load rating (C):20.3 kN; D:38.100 mm; Brand:KOYO; |
| AMI KHR209 Insert Bearings Cylindrical OD | Outer Diameter (mm):19; Bearing number:SF698-2RS; Brand:ZEN; d:8 mm; D:19 mm; Size (mm):8x19x6; Basic dynamic load rating (C):2,237 kN; C:6 mm; Bore Diameter (mm):8; Basic static load rating (C0):0,917 kN; |
| AMI UEFL209 Flange Block Bearings | Bearing number:H414245/H414210; B:41.275 mm; (Oil) Lubrication Speed:3600 r/min; r4 min.:3.3 mm; Size (mm):68.262x136.525x41.27; r3 min.:3.3 mm; (Grease) Lubrication Speed:2600 r/min; Bore Diameter (mm):68.262; d:68.262 mm; r1 min.:3.5 mm; |
| AMI KHPFT204-12 Flange Block Bearings | Y - ISO Factor1:0.99; G2 - Heat Generation Factor (Rib-Roller End):123; Cg - Geometry Factor8:0.179; Y1 - ISO Factor5:1.12; Da - Cup Frontface Backing Diameter:15.59 in; Design Units:Imperial; K - Factor3:0.97; D:16.5000 in; e - ISO Factor4:0.6; r - Cup Frontface To Clear Radius2:0.06 in; |